IEI Technology NANO-4386A2 Скачать руководство пользователя страница 128

Страница: 128 / 212

NANO-4386A2 Motherboard

Page 110

Both D

EFAULT

Allows the system to detect both the Primary and

Secondary IDE channels including the Primary Master,

Primary Slave, Secondary Master and Secondary

Slave.

Onboard PCI IDE Operate Mode [Legacy Mode]

Use the

Onboard PCI IDE Operate Mode

BIOS option to set the running mode for the

PCI IDE.

Legacy Mode

(Default)

The PCI IDE mode is the same as the IDE mode

Native Mode

The PCI IDE mode is the native mode

IDE 0 (Master) and IDE 1 (Slave)

When entering setup, BIOS auto detects the presence of IDE devices. BIOS displays the

status of the auto detected IDE devices. The following IDE devices are detected and are

shown in the IDE Configuration menu:

Primary IDE 0 (Master)

Primary IDE 1 (Slave)

Third IDE 0 (Master)

Third IDE 1 (Slave)

Fourth IDE 0 (Master)

Fourth IDE 1 (Slave)

The IDE Configuration menu (

BIOS Menu 4

) allows changes to the configurations for the

IDE devices installed in the system. If an IDE device is detected, and one of the above

listed four BIOS configuration options are selected, the IDE configuration options shown in

Section 6.3.2.1

appear.

Содержание NANO-4386A2





















































































































































































































Результаты поиска

Содержание NANO-4386A2

Отзывы:

IEI Technology NANO-4386A2, Руководство пользователя, Страница: 128 / 212

Результаты поиска

Содержание NANO-4386A2

Отзывы: