IEI Technology NANO-4386A2 Скачать руководство пользователя страница 121

Страница: 121 / 212

NANO-4386A2 Motherboard

Page 103

Key

Function

F1 key

General help, only for Status Page Setup Menu and Option

Page Setup Menu

F2 /F3 key

Change color from total 16 colors.

F2 to select color forward.

F10 key

Save all the CMOS changes, only for Main Menu

Table 6-1: BIOS Navigation Keys

6.1.3 Getting Help

When F1 is pressed a small help window describing the appropriate keys to use and the

possible selections for the highlighted item appears. To exit the Help Window press E

the F1 key again.

6.1.4 Unable to Reboot After Configuration Changes

If the computer cannot boot after changes to the system configuration is made, CMOS

defaults. Use the jumper described in

Section 5.4

6.1.5 BIOS Menu Bar

The menu bar on top of the BIOS screen has the following main items:

Main

Changes the basic system configuration.

Advanced

Changes the advanced system settings.

PCIPnP

Changes the advanced PCI/PnP Settings

Boot

Changes the system boot configuration.

Security

Sets User and Supervisor Passwords.

Chipset

Changes the chipset settings.

Power

Changes power management settings.

Exit

Selects exit options and loads default settings

The following sections completely describe the configuration options found in the menu

items at the top of the BIOS screen and listed above.

Содержание NANO-4386A2





















































































































































































































Результаты поиска

Содержание NANO-4386A2

Отзывы:

IEI Technology NANO-4386A2, Руководство пользователя, Страница: 121 / 212

Результаты поиска

Содержание NANO-4386A2

Отзывы: