IEI Technology NANO-4386A2 Скачать руководство пользователя страница 133

Страница: 133 / 212

NANO-4386A2 Motherboard

Page 115

UDMA2

Ultra DMA mode 2 selected with a maximum data transfer

rate of 33.3MBps

UDMA3

Ultra DMA mode 3 selected with a maximum data transfer

rate of 44MBps (To use this mode, it is required that an

80-conductor ATA cable is used.)

UDMA4

Ultra DMA mode 4 selected with a maximum data transfer

rate of 66.6MBps (To use this mode, it is required that an

80-conductor ATA cable is used.)

UDMA5

Ultra DMA mode 5 selected with a maximum data transfer

rate of 99.9MBps (To use this mode, it is required that an

80-conductor ATA cable is used.)

S.M.A.R.T [Auto]

Use the S.M.A.R.T option to auto-detect, disable or enable Self-Monitoring Analysis and

Reporting Technology (SMART) on the drive on the specified channel. S.M.A.R.T predicts

impending drive failures. The S.M.A.R.T BIOS option enables or disables this function.

Auto D

EFAULT

BIOS auto detects HDD SMART support.

Disabled

Prevents BIOS from using the HDD SMART feature.

Enabled

Allows BIOS to use the HDD SMART feature

32Bit Data Transfer [Enabled]

Use the 32Bit Data Transfer BIOS option to enables or disable 32-bit data transfers.

Disabled

Prevents the BIOS from using 32-bit data transfers.

Enabled D

EFAULT

Allows BIOS to use 32-bit data transfers on supported

hard disk drives.

Содержание NANO-4386A2





















































































































































































































Результаты поиска

Содержание NANO-4386A2

Отзывы:

IEI Technology NANO-4386A2, Руководство пользователя, Страница: 133 / 212

Результаты поиска

Содержание NANO-4386A2

Отзывы: