IEI Technology NANO-4386A2 Скачать руководство пользователя страница 36

Страница: 36 / 212

NANO-4386A2 Motherboard

Page 18

2.6.5 Intel

ICH4 PCI Interface

The ICH4 PCI interface provides a 33 MHz, Rev. 2.2 compliant implementation. All PCI

signals are 5 V tolerant, except PME#. The ICH4 integrates a PCI arbiter that supports up

to six external PCI bus masters in addition to the internal ICH4 requests.

2.6.6 Intel

ICH4 Real Time Clock

256 bytes of battery backed RAM is provided by the Motorola MC146818A real time clock

(RTC) integrated into the ICH4. The RTC operates on a 3V battery and 32.768KHz crystal.

The RTC keeps track of the time and stores system data even when the system is turned

off.

2.6.7 Intel

ICH4 USB Controller

Up to six high-speed, full-speed or low-speed USB devices are supported by the ICH4.

High-speed USB 2.0, with data transfers of up to 480Mb/s, is enabled with the ICH4

integrated Enhanced Host Controller Interface (EHCI) compliant host controller. USB

full-speed and low-speed signaling is supported by the four ICH4 integrated Universal

Host Controller Interface (UHCI) controller.

2.7 PCI Bus

The PCI bus controller on the ICH4 southbridge is compliant with PCI Revision 2.2

specifications and has a 33 MHz PCI clock.

2.8 LPC Bus Components

2.8.1 LPC Bus Overview

The LPC bus is connected to components listed below:

BIOS chipset

Super I/O chipset

2.8.2 BIOS Chipset

Содержание NANO-4386A2





















































































































































































































Результаты поиска

Содержание NANO-4386A2

Отзывы:

IEI Technology NANO-4386A2, Руководство пользователя, Страница: 36 / 212

Результаты поиска

Содержание NANO-4386A2

Отзывы: