IEI Technology NANO-4386A2 Скачать руководство пользователя страница 89

Страница: 89 / 212

NANO-4386A2 Motherboard

Page 71

5.2 Installation Considerations

NOTE:

The following installation notices and installation considerations should

be read and understood before the NANO-4386A2 is installed. All

installation notices pertaining to the installation of the NANO-4386A2

should be strictly adhered to. Failing to adhere to these precautions

may lead to severe damage of the NANO-4386A2 and injury to the

person installing the motherboard.

5.2.1 Installation Notices

WARNING:

The installation instructions described in this manual should be

carefully followed in order to prevent damage to the NANO-4386A2

and injury to the user.

Before and during the installation please DO the following:

Read the user manual

The user manual provides a complete description of the NANO-4386A2

installation instructions and configuration options.

Wear an electrostatic discharge cuff (ESD)

Electronic components are easily damaged by ESD. Wearing an ESD cuff

removes ESD from the body and helps prevent ESD damage.

Place the NANO-4386A2 on an antistatic pad

When installing or configuring the motherboard, place it on an antistatic

pad. This helps to prevent potential ESD damage.

Turn off all power to the NANO-4386A2

Содержание NANO-4386A2





















































































































































































































Результаты поиска

Содержание NANO-4386A2

Отзывы:

IEI Technology NANO-4386A2, Руководство пользователя, Страница: 89 / 212

Результаты поиска

Содержание NANO-4386A2

Отзывы: