IDTECK Star FINGER006, Руководство пользователя

Страница: 7 / 51

7
* Comparison Table
FINGER006
Built-in 125KHz (4”) Proximity Reader
RF(PIN) Only / Fingerprint Only / RF(PIN)+ Fingerprint
RF(PIN)+P/W(4digit) / RF(PIN)+P/W+ Fingerprint
FINGER006P
PIN(4~8digit) Only / Fingerprint Only / PIN + Fingerprint
PIN + P/W(4digit) / PIN+ P/W+ Fingerprint
FINGER006A Auto Touch Sensor for Identification
FINGER006PA Auto Touch Sensor for Identification
4. Specifications
Model FINGER006 FINGER006P
CPU 32bit ARM9 and Dual 8bit Microprocessor
Memory
Fingerprin
t Module
Program
Memory
Program Flash memory 1Mbytes
Data Memory DB Flash memory 1/2/4 Mbytes
Controller
Program
Memory
128K Byte Flash Memory
Data Memory 1M Byte Flash Memory
Fingerprint User 1,000 / 2,000 / 4,000 Fingerprint Users
Fingerprint Template Size 800 Bytes for 2 Fingerprint Templates
Read Range
Passive Type
IDK50 / IMC125:
Up to 2 inch (5cm)
IDC80 / IDC170:
Up to 4 inch (10cm)
PIN Only
Active Type IDA150 / IDA200 Comapatible
Reading Time (Card) 30ms
Verification / Identification Time Less than 1sec. / Less than 2sec.
Power / Current DC 12V / Max.300mA
External Reader Port
1ea(26bit Wiegand,
4/8bit Burst for PIN)
Communication
RS232 / RS422 (Max.32ch)
TCP/IP (Internal LAN Converter Required)
Baud Rate
9,600bps (Recommended) /
4,800bps, 19,200bps 38,400bps, 57,600bps and 115200bps
(Selectable)
Input Port 2ea (Error-Input, OK-Input)
Output Port
2ea (Error-Output , OK-Output (Open Collector Output))
Output Format 26bit Wiegand, ABA Track II
LCD
Character LCD (2 Lines x 16 Char) /
65.6mm x 13.8mm (2.62” x 0.55”) Screen