IDTECK Star FINGER006, Руководство пользователя

Страница: 44 / 51

44
12.4.11 ADAPTIVE MODE
12.4.12 FP STATUS
12.4.13 HIGH SECURITY
11. ADAPTIVE
The Adaptive Mode is a feature that improves the quality of
fingerprint images in the authentication process, guaranteeing
a higher likelihood of successful authentication. However, the
authentication process may take longer with this feature on.
To enable or disable the Adaptive Mode, press
<ENT> and
press <4> or <6> to select “ENABLE” or “DISABLE” and
press <ENT> to confirm.
11. ADAPTIVE
- > DISABLED
12. FP STATUS
NORMAL
FP Status is a special feature designed for special
environments where the fingers of most employees might be
too dry or wet. If you set the FP Status setting to dry or wet,
the FINGER006 will adjust the fingerprint images according to
the environment to improve the authentication rate.
To change the setting, press
<ENT> and press <4> or <6> to
select “NORMAL”, “DRY” or “WET” and press <ENT> to
confirm.
12. FP STATUS
- > DRY
13. HIGH SECURITY
High Security allows you to enable or disable the latent
fingerprint image processing.
CAUTION: Since the image of a latent fingerprint and that of
a dry fingerprint are both equally faint, it is hard to tell dry
fingerprints from latent images. Therefore, enabling High
Security will lower the recognition success rate of dry
fingerprints as they might be mistaken to be latent
fingerprints.
NOTE: In a place where many users have dry fingerprints, a
better recognition success rate can be achieved by adjusting
the exposure value higher and/or enabling Adaptive Mode.
13. HIGH SECURITY
- > DISABLED