IDTECK Star FINGER006, Руководство пользователя

Страница: 41 / 51

41
12.4.4 LCD TEST
12.4.5 KEYPAD TEST
3. OUTPUT TEST
Output Test allows you to test the output ports of the
FINGER006. To begin the test, press
<ENT> . First, output
ports1 and 2 will be tested. During the test, relay outputs are
activated and you will hear Tick-Tack sounds with the green
LED blinking twice. Second, output oorts3 and 4 will be
tested. During the test, TTL outputs are activated and the
yellow LED blinks twice. You can check the voltage level of
the TTL outputs with appropriate test equipment. Lastly,
output port 5 will be tested. During the test, you will hear 2
beeps. After all the tests are over, press any key to exit.
OUTPUT 1
OFF
PRESS ANY KEY…
4. LCD TEST
LCD Test allows you to test the LCD of the FINGER006. To
begin the test, press
<ENT> . Once the test begins, the LCD
will display a series of different screens. Ensure that all the
screens on the LCD are properly displayed. The test ends
with the display of the firmware update date (YYYY/MM/DD).
After the test is finished, press any key to exit.
AAAAAAAAAAAAAAA
CCCCCCCCCCCCCCC
5. KEYPAD TEST
Keypad Test allows you to test the keys on the keypad. To
begin the test, press
<ENT> . Press each key on the keypad,
then the number or letter that corresponds to the key pressed
will disappear from the screen. After all the keys are pressed,
the LCD displays the “TEST PASSED” message.
NOTE: Letter A corresponds to <ESC>, B to <ENT>, C to
<F1>, D to <F2>, E to <F3>, and F to <F4>.
5. KEYPAD TEST
0123456789ABCDEF