IDK MSD-804FD Series Скачать руководство пользователя страница 4

Страница: 4 / 233

MSD-804FD

User’s Guide

Safety instructions

Read and understand all safety and operating instructions before using this product. Follow all instructions

and cautions as detailed in this document.

Enforcement Symbol

Description

Indicates the presence of a hazard that may result in death or serious

personal injury if the warning is ignored or the equipment is handled

incorrectly.

Indicates the presence of a hazard that may cause minor personal

injury or property damage if the caution is ignored or the equipment is

handled incorrectly.

Symbol

Description

Example

Caution

This symbol is indicated to alert the user. (Warning and caution)

Electrical

Hazard

Prohibition

This symbol is intended to prohibit the user from actions.

Do not

disassemble

Instruction

This symbol is intended to instruct the user.

Unplug

Caution

Warning

Содержание MSD-804FD Series










































































































































































































































Результаты поиска

Содержание MSD-804FD Series

Отзывы:

IDK MSD-804FD Series, Руководство пользователя, Страница: 4 / 233

Результаты поиска

Содержание MSD-804FD Series

Отзывы: