IDK MSD-804FD Series, Руководство пользователя

Страница: 29 / 233

MSD-804FD
User’s Guide
29
6.5
Loading cross point
You can register up to eight cross points in the MSD, but the MSD can only load cross points 1 to 5 by cross
point load keys. To load cross points 6 to 8
, use menu settings in the “Load cross point” section (“
7.13.1
Loading cross point [LOAD CROSS POINT]
”
) or use RS-232C, or LAN.
Since nothing is registered by factory default, cross point is not valid until they are registered. To load them,
register cross points in advance.
Command control:
▪ Loading V&A input selection setting from cross point memory: @RCM
▪ Loading video input selection setting from cross point memory: @RCV
▪ Loading audio input selection setting from cross point memory: @RCA
Step 1.
Select ”PRESET LOAD” using the Operation Mode selection key.
Step 2.
Press the cross point command keys to load the cross point settings.
Commands A to E correspond to cross points 1 to 5.
Operation mode selection keys Cross point load key
POWER
ON
OFF
DIGITAL MSD-804FD
MULTI
SWITCHER
IN1 IN3 IN4 IN5 IN6 IN7 IN8
POWER
DISPLAY
1
2
3
4
IN2
M ENU/SET
ESC
COMMAND
E
COMMAND COMMAND COMMAND COMMAND
A B C D
V&A VIDEO A UDIO
SWITCHING MODE
PRESET L OAD
COM MA ND
OUT1
OUT2
OUT3
OUT4
OFF
[Fig. 6.5] Loading cross point
6.6
Locking/unlocking front keys
To lock the front panel keys, press and hold the Operation Mode selection key for 2 seconds or longer until
hearing the buzzer sound. To release the key lock, do the same operation again. When the setting is changed,
the status will be displayed for 1 second.
。
KEY LOCK ! KEY LOCK RELEASE !
Locked Unlocked
Command control: Setting and releasing key lock: @SLS/@GLS