IDK MSD-804FD Series Скачать руководство пользователя страница 124

Страница: 124 / 233

MSD-804FD

User’s Guide

124

1. To set the EDID using menu:

MSD-804FD

Top

↓

SET key

[FUNCTION SELECT]
EDID

▲▼

keys: Select “EDID”.

↓

SET key

[EDID]
EDID DATA

▲▼

keys: Select “EDID DATA”.

↓

SET key

[IN1 EDID]

NTERNAL EDID

▲▼

keys: Select the EDID.

◄►keys: Select the desired input (IN1 to IN8).

↓

SET key: Applies settings.

[EDID DATA]
NOW UPDATE...

The message is displayed for one second and then previous screen is

displayed automatically.

↓

[EDID]
EDID DATA

Note:

If you do not press the “SET” key, the EDID is not changed. Make sure to press the “SET” key.

The error message below is displayed for a second when the VFD screen moves from the sub menu to the

setup menu in the following cases:

“OUTn MONITOR” is set for any input channel, and

- no display device is connected, or

- loading EDID fails.

OUT1A MONITOR
UNCONNECTED

OUT1A MONITOR
EDID READ ERROR

If EDID cannot be updated pressing

the “SET” key, the same message is displayed for a second as well.

If the error message is displayed, check the connection of the display device. If EDID can be loaded, EDID will

be updated automatically.

2. To set the EDID using commands:

@SED: Set EDID

@GED: Get EDID

Содержание MSD-804FD Series










































































































































































































































Результаты поиска

Содержание MSD-804FD Series

Отзывы:

IDK MSD-804FD Series, Руководство пользователя, Страница: 124 / 233

Результаты поиска

Содержание MSD-804FD Series

Отзывы: