IDK MSD-804FD Series Скачать руководство пользователя страница 188

Страница: 188 / 233

MSD-804FD

User’s Guide

188

If a bitmap file is not valid, one of the following error messages will be displayed.

FILE NAME INVALID: The file name is not valid.

FILE DATA INVALID: The MSD does not support the file.

FILE DATA SIZE OVER: Exceeds the maximum resolution.

MEMORY ALLOCATE ERROR: Enough memory to save the bitmap file temporarily could not be allocated.

You may solve this error by rebooting the MSD and sending the bitmap file

again.

[Fig. 7.44] Bitmap send error

Note:

The MSD has an approximately 900,000-byte memory to save data temporarily after all bitmap data is

received. However, if bitmap data whose size is larger than 900,000 is sent, receiving and writing data are

performed simultaneously, and the browser sends a time-out status. As a result, the writing operation may fail.

Содержание MSD-804FD Series










































































































































































































































Результаты поиска

Содержание MSD-804FD Series

Отзывы:

IDK MSD-804FD Series, Руководство пользователя, Страница: 188 / 233

Результаты поиска

Содержание MSD-804FD Series

Отзывы: