IDK MSD-804FD Series, Руководство пользователя

Страница: 162 / 233

MSD-804FD
User’s Guide
162
[Step II. When setting “PORT” to CEC]
PORT:CEC
DELAY:
0 s000ms
keys: Set the delay time in seconds (0 to 999).
↓
keys
PORT:CEC
DELAY: 0s00
0 ms
keys: Set the delay time in seconds in milliseconds (0 to 999).
↓
keys
OUT1A CEC: -
keys: Select the control of OUT1A (-, POWER OFF, POWER
ON).
↓
keys
OUT1B CEC: -
keys: Select the control of OUT1B (-, POWER OFF, POWER
ON).
keys
OUT4B CEC: -
keys: Select the control of OUT4B (-, POWER OFF, POWER
ON).
↓
keys
ERROR: S TOP
keys: Select the action for when retry over occurs (STOP, EXEC).
↓
keys
MEMO:
1:
keys
: Set the “MEMO” (20 to 7D of ASCII codes except for 2C).
keys: Moves the cursor to the next character (Up to 14
characters)
↓ SET key: Applies settings.
[PRESET COMMAND 1]
NOW UPDATE...
Displays the message for 1 second before automatically returning to
the previous screen.
↓
[COMMAND EDIT]
CMD
1
Note:
If you do not press the “SET” key, the control command is not changed. Make sure to press the “SET” key.
CEC can only control the power of display devices connected to the HDMI output connector (OUT A) or
HDBaseT output connector (OUT B) . Devices connected to HDMI input connectors (IN1 to 8) cannot be
controlled, and only power control is available.
OUT1B to OUT4B are available only if HDBaseT output option is mounted.
This function may not work correctly in old devices and some devices supporting CEC.
2. To edit the control command using commands:
@SEC: Set control command (Control communication command)
@GEC: Get control command (Control communication command)
@SEC: Set control command (Display received data)
@GEC: Get control command (Display received data)
@SEC: Set control command (Control CEC)
@GEC: Get control command (Control CEC)