Part 2 - Configuration
65
●
Ignoring Interval:
The system does not produce
event log entries or issue remote notifications
regarding face detected for the time specified
after the initial motion was detected. Set the value
between 1 sec and 5 secs or choose Never.
Queue Management
●
Setup
: Configure Exceed the Time and People Limit
event.
–
Exceed the People Limit
: When the number of
selected people in a defined area (zone) exceeds
the limit, an event occurs.
–
Exceed the Time Limit
: When people stay in a
defined area longer than the time set, an event
occurs.
●
Actions:
Specify which actions to take when an event
occurs.
–
Record:
Specify which cameras to begin linked
recording on when an event occurs. If the schedule
is set to Event or Time & Event mode, the selected
cameras will begin linked recording when an event
occurs.
–
Alarm-Out:
Designate event-triggered alarm-out
channels (each for the NVR and camera) and beeps.
–
Notify:
Configure to be notified of events by Mail,
LAN1 through 5, Push, FTP, and/or Alert Window.
–
PTZ:
Moves the PTZ camera to a specific preset
position when an event occurs.
–
Event Monitoring:
Selects the cameras to monitor
when an event occurs.
•
In order to use the Callback feature, the NVR must
be registered on the remote program.
•
In order to use the Queue Management feature, it
should be set on the channel.
'
