Part 2 - Configuration
66
VA Loss
●
Activation Time
: Specify how long VA loss has to last
in order for it to be considered as an event. When the
VA loss is not detected for the specified duration of
time, it will not be considered as an event.
●
Actions
: Specify which actions to take when a VA loss
event occurs.
–
Record
: Specify which cameras to begin linked
recording on when an event occurs. If the schedule
is set to
Event
or
Time & Event
mode, the selected
cameras will begin linked recording when an event
occurs.
–
Alarm-Out
: Designate event-triggered alarm-out
channels (each for the NVR and camera) and beeps.
–
Notify:
Configure to be notified of events by Mail,
LAN1 through 5, Push, FTP, and/or Alert Window.
–
PTZ
: Moves the PTZ camera to a specific preset
position when an event occurs.
–
Event Monitoring:
Selects the cameras to monitor
when an event occurs.
In order to use the Callback feature, the NVR must be
registered on the remote program.
Device Setup
Refer to the
for basic
information on using the Setup menus.
Alarm-Out
Click the + icon at the bottom left corner of the screen
to add a schedule.
You can apply different schedules for different
Day
s of
the week.
Select icon to delete the schedule.
●
Dwell Time
: Select a value between 5 secs and 15
mins as the alarm-out duration.
●
Title
: Designate a name for the alarm-out.
●
Range
: Change the schedule time frame.
●
Mode
: Select
Event
,
On
, or
Off
.
Event
Generates an alarm-out when an event
occurs.
On
Alarm-out is always on.
Off
Alarm-out is always off.
●
Channels
: Configure alarm-out port and beep
settings.
