Part 3 - Configuration
56
•
Status
: Indicates the number of the port forwarded
by the IP router (or NAT) to the NVR via UPnP
service.
DHCP
Select
DHCP
and then
Save
to retrieve IP address
and other network settings automatically from the
DHCP server. Once the network settings have been
retrieved, the NVR's current IP address is displayed in
the IP Address field.
• It may not be possible to retrieve the IP address
if there is no DHCP server. If this is the case,
contact your network administrator.
• With DHCP, the NVR's IP address might change
with each startup.
There is a limit to the number of users allowed to
connect remotely at the same time. Contact the
service center for more information.
FEN
If using a dynamic IP address, FEN service makes it
easy to connect to the NVR from a remote program
without having to configure dynamic IP or router
settings.
•
Use FEN
: Check if you wish to use FEN service.
•
FEN Server
: Enter the FEN server's IP address or
domain name.
If you have configured the DNS Server setting under
Network - IP Address
, you can enter the FEN
server's domain name instead of its IP address in the
FEN
Server
field.
•
Port
: Specify the FEN server's port number.
If using an IP router (or NAT), port configuration and
other network functions will depend on the usage
method of the IP router (or NAT).
•
Device Name
: After entering the NVR name you
wish to register on the FEN server, check and
register the entered name. This is a unique NVR
name that will be registered on the FEN server.
• You will not be able to save FEN settings unless you
click on the Check button next to the NVR Name
field and check the entered name's availability.
• You will be prompted with an error message if you
do not enter NVR name or enter a name already
registered to the FEN Server.
• If the device name contains the #, \, and/or %
symbol, it might not be able to connect to the NVR
from the IDIS Web program.
•
Status
: Used to check the status of the device
being registered to the FEN server.
Select
Save
after making changes to register the
NVR's name to the FEN server.
If FEN has been configured correctly, the FEN
server's help desk information will be displayed in the
Help Desk
field the next time you access the FEN
Setup screen.
