Part 4 - Search
69
•
One-Touch Clip Copy
configures the storage
range automatically based on the storage drive's
capacity. If there is insufficient space available
on the selected storage device, you will only be
able to Clip Copy an amount of data equaling the
remaining space available on the storage device.
• The maximum size limit on Clip Copy files is
30GB. Clip Copying a segment that is more than
2GB in size produces multiple files that are up
to 2GB in size, each. The maximum size limit for
One-Touch Clip Copy files is 2GB.
• Clip Copy files can be played back on Windows
systems. For more information, refer to the IDIS
Center operation manual.
• For USB flash memory devices, the NVR supports
the FAT32 file format only.
Do not disconnect the USB cable or power off the
USB device while USB Clip Copy is in progress.
Doing so can cause the NVR to malfunction or
critically damage the external USB device's file
system. You may be prompted with an error
message when trying to back up on the device.
If so, you will need to restart the NVR. If the
USB hard disk's file system has been damaged,
restarting the NVR will not solve the problem and the
aforementioned error message will continue to be
displayed each time you attempt a backup. If this is
the case, you will need to format the HDD or use a
recovery program to repair the damage to the drive's
file system.
Print the current image.
While in
Search Mode
, select
Pause
to pause
playback. Select
from the Search menu to open
up the Print Setup window.
•
Printer Model
-
File Printer
: Saves the current frame to the USB
storage device as a .pdf file that can be printed on
the printer connected to a computer.
•
Paper Size
: Select the desired paper size.
•
File name
: Designate a name for the file.
Event Log Search
Select
Search Mode
>
Event Log Search
to bring
up the Event Log Search window.
• Select an event to display the recording made on
the selected time and date (paused state). Select
the Play button in the middle of the screen to start
playing back the recording. Use the drop-down
menu above to load recordings from other cameras.
• You can uncheck the
First
and
Last
options at the
top of the Event Log Search window and specify the
search time frame manually.
Select First for From and Last for To to select the
entire recording from start to end.
• If designating
From
or
To
settings manually, you will
be able to enable/disable the
Check Time Overlap
option.
If the system's clock has been changed and the
designated
From
or
To
point exists at more than
one location, you will have to choose one. Only the
events that took place between the selected
From
and
To
points will be searched. If
Check Time
Overlap
has not been selected, events from the
entire
From
and
To
range will be searched.
