![background image](http://html1.mh-extra.com/html/idex/pulsafeeder-mpc-vector/pulsafeeder-mpc-vector_installation-operation-and-maintenance-manual_3700937039.webp)
33
6.8 Factory Re-Initialization
Factory Re-initialization is typically not required. When re-initializing your MPC VECTOR, all of the
current system settings and calibration information will be overwritten by the original factory default
settings. The controller must be re-configured and re-calibrated to your specifications.
A Factory Re-initialization should be performed only if there is reason to believe that the MPC VECTOR is
operating abnormally. The condition usually manifests itself with inconsistent or erratic operation – often
associated with meaningless characters on the display, or exaggerated numerical values. Commonly, a user has
entered incorrect parameters, or made changes to the setup of the control.
Once a re-initialization has been performed, all operating parameters should be checked and adjusted or re-entered
as necessary, including maximum flow and rpm, motor parameters, flow and analog signal calibrations, etc.
Factory Re-Initialization:
1.
Press the MENU key to access the System Setup Menu
- M E N U -
C A L I B R A T I O N
2.
Press the UP arrow key to display
- M E N U -
S Y S T E M S E T U P
3.
Press the ENTER key
S Y S T E M S E T U P
S T A T U S
4.
Press the UP arrow key twice
S Y S T E M S E T U P
F A C T O R Y I N I T
5.
Press the ENTER key
P R E S S E N T E R
T O F A C T O R Y I N I T
6.
Press the ENTER key
A R E Y O U S U R E ?
Y E S = E N T E R N O = M E N U
7.
Pres the ENTER key
R E S E T T I N G P U M P
T O F A C T O R Y I N I T
Содержание Pulsafeeder MPC Vector
