IDEC MICROSmart FC5A Series, Руководство пользователя

Страница: 209 / 343

16: I
NTELLIGENT
M
ODULE
A
CCESS
I
NSTRUCTIONS
FC5A M
ICRO
S
MART
U
SER
’
S
M
ANUAL
FC9Y ‐ B1273 16 ‐ 3
RUNA WRITE (Run Access Write)
Applicable CPU Modules
Valid Devices (Run Access Write)
For the valid device address range, see pages 6 ‐ 1 and 6 ‐ 2
(
Basic Vol.).
DATA: Specify the first device address to extract the data to write to the intelligent module.
When T (timer) or C (counter) is used as DATA for Run Access Write, the timer/counter current value (TC or CC) is writ ‐
ten to the intelligent module.
All data registers, including special data registers and expansion data registers, can be designated as DATA.
When a constant is designated as DATA, Repeat cannot be selected. For details about the data movement with or with ‐
out Repeat, see page 16 ‐ 7.
STATUS: Specify a data register to store the operating status code. Data registers D0 ‐ D1999 and D10000 ‐ D49999 can be desig ‐
nated as STATUS. Special data registers and expansion data registers cannot be designated. For status code description,
see page 16 ‐ 6.
SLOT: Enter the slot number where the intelligent module is mounted. A maximum of seven intelligent modules can be used.
ADDRESS: Specify the first address in the intelligent module to store the data.
BYTE: Specify the quantity of data to write in bytes.
The RUNA WRITE instruction cannot be used in an interrupt program. If used, a user program execution error will result, turning on
special internal relay M8004 and the ERR LED on the CPU module.
Valid Data Types
FC5A ‐ C10R2/C/D
FC5A ‐ C16R2/C/D
FC5A ‐ C24R2D
FC5A ‐ C24R2/C FC5A ‐ D16RK1/RS1 FC5A ‐ D32K3/S3 FC5A ‐ D12K1E/S1E
— — X X X X
Device Function I Q M R T C D Constant Repeat
DATA First device address to extract data from X X X X X X X X X
STATUS Operating status code — — — — — — X — —
SLOT Intelligent module slot number — — — — — — — 1 ‐ 7 —
ADDRESS First address in intelligent module to write data to — — — — — — — 0 ‐ 127 —
BYTE Bytes of data to write — — — — — — — 1 ‐ 127 —
W (word) X
I (integer) X
D (double word) —
L (long) —
F (float) —
While input is on, data in the area starting at the
device designated by DATA is written to ADDRESS in
the intelligent module designated by SLOT.
BYTE designates the quantity of data to write.
STATUS stores the operating status code.
DATA(R)
*****
SLOT
*
STATUS
*****
BYTE
***
ADDRESS
***
RUNA(*)
WRITE
When a bit device such as I (input), Q (output), M (internal relay), or R (shift register) is designated as
DATA, 16 points are used.
When a word device such as T (timer), C (counter), or D (data register) is designated as DATA, 1 point is
used.