IDEC KW2D Series Скачать руководство пользователя страница 92

Страница: 92 / 129

2 KW2D Series Smart RFID Reader Functions

5-24

KW2D Series Smart RFID Reader User’s Manual

Write 08xxh (xx: Authority to set) to the holding register 0008.
When there is a change in the tag list, update the tag list of the KW2D Smart RFID Reader and restart. When there is

no change in the tag list, return to "operation mode (running)".

If the power is turned off without performing step

, the contents registered here will be discarded and the tag list

before registration will be restored.

To cancel the registration of the tag, write 04xxh (xx: Authority) to the holding register 0008. The KW2D Smart RFID

Reader returns to "operation mode (running)".

■

Procedure for changing tag information registered in the tag list

Write 01xxh (xx: Authority set to the tag information to change) to the holding register 0008.

The KW2D Smart RFID Reader shifts to "tag edit mode (registering)".

Buzzer

LED

Status

One short beep

The LEDs (green) and the LEDs (red)

are ON.

Completed updating the tag list of the KW2D Smart RFID

Reader

When the number of registrations exceeds 500, among the RFID tags registered using the master tag or shared

memory, overwrite and register additionally the tag which the check box of Enable/Disable is cleared (Disable)

and the check box of Protect is also cleared. If there is no disabled tag in the tag list, the KW2D Smart RFID

Reader will be in the "registration failed" state.

Buzzer

LED

Status

None

The LEDs (green) are ON and the LEDs (white)

flash rapidly. (100 ms interval)

Waiting to receive the tag information change

command.

Deleting
The LEDs (red) are ON and the LEDs (white) flash rapidly.

Deletion complete
The LEDs (green) and the LEDs (red) are ON.

LED (white)

LED (red)

LED (green)

One short beep

Registering
The LEDs (green) are ON and the LEDs (white)
flash rapidly.

LED (white)

LED (green)

Running
The LEDs (white) flash slowly.

Содержание KW2D Series


































































































































Результаты поиска

Содержание KW2D Series

Отзывы:

Похожие инструкции для KW2D Series

Бренды по названию

Популярные бренды

IDEC KW2D Series, Руководство пользователя

Результаты поиска

Содержание KW2D Series

Отзывы:

Похожие инструкции для KW2D Series

Бренды по названию

Популярные бренды