2 KW2D Series Smart RFID Reader Functions
KW2D Series Smart RFID Reader User’s Manual
5-23
5
Fu
nc
tio
ns
a
nd
S
ettin
gs
2
Hold up the RFID tag to be registered.
Name1
of the successfully registered tag is "ADD TAGXXX" (XXX: Registration position 001 to 500 in the tag list),
Authority (1 to 255)
is the authority written in the holding register 0008 in the registration procedure 1, and the
check box of
Protect
is cleared.
Repeat step
2
as many times as the number of RFID tags to be registered. Next, proceed to step
4
.
3
Write the tag information to be registered to the holding registers 0009 to 0032 and 10xxh (xx: Authority to set) to
the holding register 0008.
Repeat step
3
for the required number of tag information according to the number of RFID tags to be registered. To
execute the same command continuously, after the value of the input relay 0019 changes to 1, write 00xxh (xx:
Authority) to the holding register 0008 to initialize the command, and then write the next command.
Buzzer
LED
Status
One short beep
The LEDs (green) are ON.
Successful registration
Four short beeps
The LEDs (red) are ON.
Registration failure
Buzzer
LED
Status
One short beep
The LEDs (green) are ON and the LEDs (white) flash
rapidly. (100 ms interval)
Update command (write 10xxh to holding
register 0008) is accepted.
LED (red)
Registering
The LEDs (green) are ON and the LEDs
(white) flash rapidly.
Registration failure
The LEDs (red) are ON.
Registration successful
The LEDs (green) are ON.
LED
（緑）
LED (white)
LED (white)
LED (green)
LED (green)
LED (green)
LED (red)
One short beep
Four short beeps
Update completed
Registering
LED (white)
LED (white)
LED (green)
LED (green)
One short beep
LED (white)
LED (white)
LED (green)
LED (green)
