Ideal-Tridon Strapbinder, Руководство по эксплуатации, частям и безопасности

Страница: 35 / 40

TOOL MAINTENANCE
GENERAL
The most common reason for poor tool performance and incorrectly J-Locked clamps is improper
tool maintenance. The easiest way to determine if a tool is performing correctly is by inspecting
and testing the hose assembly. Having a tool maintenance program is a simple task which
consists of three parts. First, a quick daily inspection of the tool for any worn or broken parts.
Secondly, keep each tool on a schedule of service intervals for cleaning and lubrication. Third,
when problems do occur, use the troubleshooting guide to properly determine and fix problems
before they lead to more serious tool conditions. Each of these three tasks have been outlined for
this particular tool, read and understand all information for improving the life and performance of
the tool.
TOOL INSPECTION
Visually inspect the exterior of the tool on a daily basis. Decreased tool life can be prevented by
early detection of broken parts. Replace all broken parts with new parts. Review any part removal,
replacement & adjustment instructions found in this manual.
SERVICE INTERVALS
Tool component wear is affected by the environment, clamp/seal quantity and band gauge which
the tool is subjected to. All critical moving components of the tool should be inspected
periodically. Broken parts can increase cutting effort, leading to additional component wear and
produce lower joint strength.
Inspect the components of the tensioning/cutting mechanism when:
A. J-Lock is not all formed or formed improperly.
B. Tensioning effort seems sluggish or tool has difficulty cutting band.
C. The number of cycles from one battery charge decreases.
D. When scheduled.
TOOL LUBRICATION
Strapbinder tools use a variety of greases and oils, all of which can be ordered through
Strapbinder. When ordering indicate tool model, part number and name.
THREAD SEALANTS
Strapbinder tools are assembled using a variety of thread sealants, all of which can be ordered
through Strapbinder service using the appropriate description and part number.
35