Ideal-Tridon Strapbinder, Руководство по эксплуатации, частям и безопасности

Страница: 20 / 40

5.6.11 Clamp, Preformed
General Uses:
Versatile and commonly used to secure hose to many types of fittings, including short, medium
and long shank fittings, as well as cam and groove fittings. Can be used with a hand tool in the
field, or on site with a hand or automatic production hose clamping machine.
Limitations:
Do not use for steam or other applications where clamp re-tightening is required.
Warnings:
It is recommended that more than one clamp be used if the hose shank length or fitting design
will allow.
It is necessary to properly offset buckles 180 degrees to avoid potential leak paths.
Improperly tightened clamps or an insufficient number of clamps used per fitting may result in a
potentially dangerous hose assembly. A tighter clamp keeps the fitting more secure, but
excess tension could damage the hose.
Performed clamp design, metal thickness, band width, materials and tension will all have an
effect on assembly pressure ratings. Please contact your NAHAD Hose Safety Institute
Distributor for guidance.
BEST PRACTICES FOR HOSE ASSEMBLY
NAHAD Handbook, Section 5.6.11 (reprint)
20