Ideal-Tridon Strapbinder, Руководство по эксплуатации, частям и безопасности

Страница: 3 / 40

READ THESE INSTRUCTIONS CAREFULLY.
FAILURE TO FOLLOW THESE INSTRUCTIONS CAN RESULT IN SERIOUS PERSONAL INJURY.
6. CUTTING TENSIONED CLAMPS
Use only cutters designed for cutting clamps; never use claw hammers, crowbars, chisels,
axes or similar tools. Such tools will cause the clamp to fly apart with hazardous force.
Before using any Strapbinder product, read its Operation and Safety Manual.
7. GUARD AGAINST ELECTRIC SHOCK
8. CONSIDER WORK AREA ENVIRONMENT
!
Prevent body contact with grounded surfaces, such as pipes, radiators, ranges,
refrigerator enclosures.
!
When tool and charger are used outdoors, use only extension cords intended for outdoors
and so marked.
!
Wear protective gloves and non-skid footwear when working outdoors.
!
Never expose power tools to moisture.
!
Never operate tool in presence of gases or flammable liquids.
9. DO NOT ABUSE TOOL
!
Keep handle dry, clean and free from oil and grease.
!
Always keep all cords from heat, oil and sharp edges.
!
Always store idle tool in dry, high or locked-up place.
!
Always remove battery from tool when not in use or before servicing.
!
To avoid unintentional starting, never carry plugged-in tool with finger on switch.
10. MAINTAIN TOOL WITH CARE
Check tool for damaged parts. Check for alignment of moving parts, binding of moving parts,
breakage of parts, mounting, and any other condition that may affect its operation. A guard or
other part that is damaged must be replaced by an authorized service center unless otherwise
indicated elsewhere in this instruction manual. Have damaged switches replaced by
authorized service center. Do not use tool if switch does not turn it on and off.
!
When servicing double insulated tool, use identical replacement parts.
!
Keep tool clean for better and safer performance.
!
Inspect tool, battery and charger periodically and, if damaged, have repaired by authorized
service facility.
3