IDEAL INDUSTRIES Audacy Wireless Controls Скачать руководство пользователя страница 29

Страница: 29 / 48

APPENDIX

B: PRE-COMMISSIONING CHECKLIST

GATEWAY

Gateway is installed, has power and is accessible

Ethernet Drop for network connectivity is available for Gateway

IP address has been assigned for Gateway
• If a static IP is being used, the appropriate Netmask, Gateway IP and DNS address for Gateway

are to be made available prior to commissioning

• If DHCP is to be used, a MAC reservation must be created prior to commissioning

User name and password for Gateway have been created and made available

Advanced scheduling has been set up (optional, requires valid NTP server address)

PROXY

Server has been selected to host proxy software
• Windows 7 or better

- 2GHZ CPU minimum

- 2GB RAM minimum

- 10MBPS network interface

• Mac OS
• Linux

Port 993 (outgoing) open to the Internet

Proxy has network connectivity to all Gateways

PHYSICAL INSTALLATION

All Luminaire Controllers installed per plan

All sensors and switches powered on and installed per plan

DATA COLLECTION

Detachable bar code label from each Luminaire Controller, sensor and switch have been removed and placed
on reﬂected ceiling plan or other document to record location of each device

Fixture information recorded for accurate consumption reporting
• Voltage

•  Amp draw
•  Power factor
•  Bulb type

CONFIGURATION

Desired Room names and Room Groups have been provided

Floor plan image (PDF, JPEG or PNG) provided for visual Room selection (optional)

Scheduling, Occupancy or Vacancy deﬁned for each Room
•  Vacancy timeout
•  Occupancy/Vacancy dim
•  Schedule (if applicable)

Up to four Scenes deﬁned for each Room (optional)
• Scene name
• Desired light levels for each Luminaire Controller for each scene

Upper and lower light levels for daylight harvesting areas deﬁned

PERSONNEL AVAILABILITY

Authorized person available to walk through space to answer questions on conﬁguration and sign off on ﬁnal
commissioning

Person(s) are available for Audacy system operation training upon completion of commissioning

Содержание Audacy Wireless Controls

















































Результаты поиска

Содержание Audacy Wireless Controls

Отзывы:

Похожие инструкции для Audacy Wireless Controls

Бренды по названию

Популярные бренды

IDEAL INDUSTRIES Audacy Wireless Controls, Руководство пользователя

Результаты поиска

Содержание Audacy Wireless Controls

Отзывы:

Похожие инструкции для Audacy Wireless Controls

Бренды по названию

Популярные бренды