IDEAL INDUSTRIES Audacy Wireless Controls Скачать руководство пользователя страница 7 | Manualshive

Страница: 7 / 48

background image

7

INSTALL

3.0 SYSTEM SETUP

Luminaire Controllers are easily installed modules that
can turn on/off and dim fixtures and are available as
internal or external mount to allow for junction box or
fixture installation. For maximum flexibility each fixture
can be controlled by a single Luminaire Controller or a
Luminaire Controller can control multiple fixtures as a zone
(see Appendix p. 33 for maximum fixtures per Luminaire
Controller).

As a reminder

, keep track of serial numbers as described

in Section 3.1.1.

Refer to Appendix p. 34 for Luminaire Controller one line
drawings and p. 31 for device information.

The Plug Load Controller is a 20-Amp rated wireless switch
to control power to a typical outlet. This product requires
wiring to be performed per the NEC and local codes
dictated by the AHJ.

WARNING:

Before working on any circuits, verify that

Power is turned OFF to the branch circuit coming into the
outlet box being updated.

3.2.2 LUMINAIRE CONTROLLER INSTALLATION

3.2.3 PLUG LOAD CONTROLLER INSTALLATION

Retro-fit Installation (for single outlet in box)

1. Remove the old device and disconnect the Line and

Neutral wires from device. Keep the ground wire
attached.

2. Disconnect the Line and Neutral wires that were

coming to the device from their pigtail connections.

3. Connect the Plug Load Controller LINE (black) and

NEUTRAL (white) wires to the pigtails that were
connected to the device that was just removed.
These wires are on the side of the device which will
face the box.

4. Re-connect the device to the SWITCHED HOT (red)

and NEUTRAL (white) coming out of the Plug Load
Controller. This side is facing out towards the device.

5. Terminate the wires to the device as required per the

device installation instructions.

6.

IMPORTANT:

Position the Plug Load Controller into

the junction box so the serial number label is facing
toward the outlet.

7. Place “Controlled outlet” sticker on the face of the

outlet.

8. Or use a “Controlled Device” outlet that is properly

marked for this application.

Device side wiring

Plug Load Label Facing Outlet

As a reminder

, keep track of serial numbers as described in Section 3.1.1.

Retro-fit Installations (for single outlet plus branch circuit run continuing from box)

1. Follow same instruction as above, but pigtail the red hot wire to the run traveling to other devices on the same circuit.
2. You may run 2 separate runs that have 1 always HOT and 1 Switched Hot if so desired to the next run on the circuit.

«
...
5
6
7
8
9
...
»

Содержание Audacy Wireless Controls

















































Отзывы:

Нет отзывов

Похожие инструкции для Audacy Wireless Controls

Бренд: Baader Planetarium Страницы: 7

Бренд: Beaphar Страницы: 2

Бренд: Bang & Olufsen Страницы: 80

Бренд: Bang & Olufsen Страницы: 13

Бренд: CALEFFI Страницы: 12

QuickSetter+ 132 Series

Бренд: CALEFFI Страницы: 5

Бренд: Daikin Страницы: 48

Бренд: Daikin Страницы: 77

Бренд: Daikin Страницы: 32

Бренд: Daikin Страницы: 46

Бренд: Daikin Страницы: 14

Бренд: Daikin Страницы: 16

Бренд: Daikin Страницы: 1

Бренд: FASAR ELETTRONICA Страницы: 2

Бренд: Faro Barcelona Страницы: 8

Бренд: Faro Страницы: 3

Бренд: YASKAWA Страницы: 456

Бренд: M-Audio Страницы: 26

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды