IdeaFly MARS Скачать руководство пользователя | Manualshive

Страница: 29 / 40

background image

29

MARS

QUADCOPTER OPERATOR’S MANUAL

fPv SySTEM OvERviEw

Antenna Mount

- Used to connect the 5.8GHz mushroom-style receiver antenna.

A/V In

- Used to plug an external video source into to view on the FPV monitor when powered ON.

Band Select

- Press to manually select one of the four Channel Bands A, B, C or D.

Channel Select/Scan

- Press and HOLD for 3 seconds to begin an automatic scan of all available channels and

bands for the best, most reliable picture. Press to manually select channels 1 through 8 on the current Channel Band.

Charge LED

- Indicates the current charging status of the internal battery. When solid Red, the internal battery is

charging and when solid Green, the internal battery is fully charged.

Charge Port

- Used to charge the internal battery that powers the FPV monitor, using the included micro USB charge cord.

Decrease

- Press to decrease Menu values.

Increase

- Press to increase Menu values.

Menu

- Press to change various options, such as Brightness, Contrast, Color, Mode, Language and Reset.

On/Off Switch

- Used to power the FPV monitor ON and OFF.

FPV Monitor Specifications:

• Screen Size/Type ................4.3” TFT Long Life LCD
• Resolution ...............................................................480x272
• Aspect Ratio ...................................................................16:9
• Brightness ...........................................................500cd/m

2

• Video Format .............................................................NTSC
• Input Signal .....................................................................A/V
• Working Voltage ..............................................................5V
• Power Consumption ............................................500mA
• Battery ............................. 2200mAh Lithium (Internal)

On/Off Switch

Channel Select/Scan

Antenna Mount

Charge Port

Charge LED

A/V In

Band Select

Menu

Decrease

Increase

FPV Receiver Specifications:

• Sensitivity ............................................................................-90dBm
• Frequency Range .............................5658MHz to 5945MHz
• Channel .....................................................................32-Channels
• Audio ................................................................. 6.0MHz / 6.5MHz

USiNG ThE fPv SySTEM

ChARGiNG ThE fPv MONiTOR

1) Verify that the FPV monitor is powered OFF.

2) Connect the FPV monitor to a powered USB port on your PC or laptop, or other 5V USB-compatible charging

device, using the micro USB charge cord included. The Charge LED will turn Red, indicating the internal battery

is charging. When fully charged, the Charge LED will turn Green.

A
B

C
D

BAND

FREQUENCY (MHz)

CH1

5658
5740
5865
5705

CH2

5695
5760
5845
5685

CH3

5732
5780
5825
5665

CH4

5769
5800
5805
5645

CH5

5806
5820
5785
5885

CH6

5843
5840
5765
5905

CH7

5800
5860
5745
5925

CH8

5917
5880
5725
5945

Under ideal conditions, the

range of the FPV system is

approximately 550 yards (500m).

«
...
27
28
29
30
31
...
»

Содержание MARS









































Отзывы:

Нет отзывов

Похожие инструкции для MARS

Бренд: SPEDIX Страницы: 8

DJI MATRICE 300 RTK

Бренд: Flying Eye Страницы: 13

Бренд: TCMM RC Страницы: 2

Бренд: Vifly Страницы: 8

Бренд: REES52 Страницы: 27

Бренд: Apex Digital Страницы: 2

Бренд: Apex Digital Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды