IdeaFly MARS Скачать руководство пользователя страница 26

Страница: 26 / 40

MARS

QUADCOPTER OPERATOR’S MANUAL

1) Connect the quadcopter to your PC or Laptop and open the Autopilot Configuration program. For more information,

see the Autopilot Configuration Program section on pages 23 through 26.

2) After connecting and opening the Autopilot Configuration program, press the Open USB button. A USB Connected

dialog box will appear. Press OK to close it.

Adjust Transmitter Settings, Continued:

FLIGHT-MODE

- This value displays the Flight Mode that is assigned to the current Flight Mode Switch position.

You are able to verify which Flight Modes are programmed to the

Flight Mode Switch positions by moving the Flight Mode Switch

and seeing which Flight Mode is displayed.

STICK LAYOUT

- This option allows you to select the control stick

mode layout display, so you can view the current status of the

control stick positions. When the control sticks are centered, the

indicators should all be Green. If any indicators are Red when

the control sticks are centered, you should first verify that the trim

switches are all centered. If after centering the trim switches

there are still Red indicators, the control sticks should be

calibrated. For more information, see the Calibrating the Control

Sticks section on page 34.

The included transmitter operates in Mode 2, so you should select Mode 2 prior to checking the calibration

settings. This function only changes the Stick Layout screen. It does not change the actual transmitter Mode.

AUTOPiLOT CONfiGURATiON PROGRAMMiNG

PROGRAMMiNG vALUE DEfiNiTiONS, CONTiNUED....

fAiLSAfE fUNCTiON

Your Mars series quadcopter features a Failsafe function, that when activated, commands the quadcopter to return

to its Home Point and land (Return to Home function). The Failsafe function will activate automatically if the quadcopter

should exceed the altitude and/or distance limits in the Autopilot Configuration programming or if the RF signal

between the transmitter and receiver fails. For information about the Return to Home function, see the Using the Return

to Home function section on page 22.

ChECkiNG ThE fAiLSAfE fUNCTiON

3) Place the throttle control stick at the 50% (half throttle) position, move

the Flight Mode Switch to the Return to Home (3) position, then turn the

Camera Gimbal Control Dial all the way to the right.

4) Turn the transmitter OFF. The FLIGHT-MODE value

should show Return&Land(F/S).

The FLIGHT-MODE value will show whatever

Mode you have programmed to the F/S OPTION

programming value. In the default configuration, this

is Return & Land.

we don’t suggest using the Land

or AutoHover options!

SEE THE NEXT PAGE FOR IMPORTANT INFORMATION ABOUT MAXIMUM ALTITUDE AND DISTANCE LIMITS!

FAILURE TO UNDERSTAND THE MAXIMUM ALTITUDE AND DISTANCE LIMITATIONS AND HOw

THEY INTERACT wITH THE FAILSAFE FUNCTION CAN RESULT IN A CRASH.

Содержание MARS









































Результаты поиска

Содержание MARS

Отзывы:

Похожие инструкции для MARS

Бренды по названию

Популярные бренды

IdeaFly MARS, Руководство оператора

Результаты поиска

Содержание MARS

Отзывы:

Похожие инструкции для MARS

Бренды по названию

Популярные бренды