ICT Protege PRT-RDE2-PCB, Руководство по установке

Страница: 26 / 42

26
PRT-RDE2-PCB Protege Ethernet 2 Reader Expander Installation Manual | June 2017
5.2 Trouble Zone Inputs
Each reader expander can monitor up to 16 trouble zones. Trouble zones are used to monitor the status of the
reader expander and in most cases are not physically connected to an external zone. For example, trouble zone
RD001:06 is used to monitor door 1 for a forced open condition and will generate an alarm state if the door is
forced.
The following table details the trouble zones that are configured in the system and the trouble type and group
that they activate.
Zone Number Description Type Group
RDxxx:01 Module Tamper System Tamper System
RDxxx:02 AC failure Power Fault General
RDxxx:03 Low Battery Power Fault General
RDxxx:04 Aux Failure Power Fault General
RDxxx:05 Lock Failure Power Fault General
RDxxx:06 Door 1 Forced Forced Door Access
RDxxx:07 Door 2 Forced Forced Door Access
RDxxx:08 Door 1 Left Open Left Open Access
RDxxx:09 Door 2 Left Open Left Open Access
RDxxx:10 Reader 1 Voltage Power Fault General
RDxxx:11 Reader 2 Voltage Power Fault General
RDxxx:12 Reader 1 Tamper System Tamper System
RDxxx:13 Reader 2 Tamper System Tamper System
RDxxx:14 Door 1 Lockout Attempts Access
RDxxx:15 Door 2 Lockout Attempts Access
RDxxx:16 Module Offline Module Offline System
Replace 'xxx' with the appropriate address of the Reader Expander that you are programming.