Modular Power Series
855-340-004_Rev2.0_Instruction Manual
Page
59
of 81
4.7.1 BASIC SETUP
Use this tab to configure the unit’s name, set the date and time and enable
the watchdog timer and data logging features.
Power System Device Info
Device Name:
Enter a descriptive name for the system. This name will
be used in all e-mail messages.
Model:
Shows
the model number, series name, and voltage
configuration.
Hardware:
Shows the hardware version.
Date and Time Settings
Current System Time:
Shows the current system date and time.
Synchronize with NTP Server:
Select the check box to synchronize
with NTP Server. The default is Enabled.
NTP Server:
Set an NTP server address here (i.e., time.nist.gov) to
automatically load network time.
Time Zone:
Set the time zone this unit will be using.
Set Time Manually:
Select the check box to enable manually setting the
time and date. The default is Disabled.
