Modular Power Series
855-340-004_Rev2.0_Instruction Manual
Page
36
of 81
4.0 OPERATION: GRAPHICAL USER INTERFACE
Connect to the Intelligent Modular Power Series via Ethernet for full access
to all system settings, status, and alarm conditions. Units with the Intelligent
Control Module (ICM) installed are equipped with a built-in web server that
can be accessed via any standard web browser on a network connected
computer or phone. No additional software is required on the unit.
4.1 Log In/Log Out
1.
Connect to the Modular Power Series by entering the IP address of the
unit in the location/address field of the browser as shown:
The default IP address of the unit is "192.168.0.180", but any unit
connected to a network with a DHCP server will be assigned a different
IP address automatically. To find the assigned address use the front
display screen on the unit and navigate to the Network Status screen
(see Section 3.2.6).
NOTE: Take note of the assigned IP address displayed and use this in the
browser address field to access the unit remotely.
The IP address of any ICT unit on a local network can be found by
running the ICT "IP Address Discovery tool", after installing it on a
Windows computer connected to the same network (tool available for
download from ICT http://www.ict-power.com/resources/tools-utilities/).
This tool does not support macOS.
2.
Log into the unit’s built-in server when prompted with the username and
password. The default user name is "admin", and no password is
required as the factory default.
To log out of the ICT Modular Power Series GUI, click on the Logout
link on the top right of the browser window. The system will also
automatically log off the user after 20 minutes of inactivity.
4.2 System
Once successfully logged in, the System tab will be shown in the browser.