ICP DAS USA WISE-75 M Series, Руководство пользователя

Страница: 245 / 314

ICP DAS WISE User Manual
http://wise.icpdas.com
245
Internal Register is from the Host controller (WISE). The “Remote”
in the “Source” field mean the Internal Register is from the remote
WISE-71xx controller. Please note: the Internal Register you select
has to be enabled in Advanced Setting.
ii
Specify the Operator in the “Operator” field. The 6 operators are as
follow:
 “=”
：
Indicate assign the new Internal Register value as the
value in “Value” field.
 “+=”
：
Indicate assign the new Internal Register value as the
original Internal Register value plus the value in “Value” field.
 “-=”
：
Indicate assign the new Internal Register value as the
original Internal Register value minus the value in “Value”
field.
 “*=”
：
Indicate assign the new Internal Register value as the
original Internal Register value times the value in “Value” field.
 “/=”
：
Indicate assign the new Internal Register value as the
original Internal Register value is divided by the value in
“Value” field.
 “%=”
：
Indicate assign the new Internal Register value as the
original Internal Register value divide the value in “Value” field
and return the remainder.
iii
Set up the value in the “Value” field, WISE provides 12 value options.
Please refer to “
10.2.1.3 AO
” section for detail.
iv
Specify the “Execution Frequency” to be “One Time” or “Repeat”.
Please refer to “ 10.2 THEN/ELSE Action Setting
” for detail.
v
Click “OK” button to confirm the settings and return to the Rule
settings page.
10.2.17 Rule Status
The Rule Status can be modified to be Disable or Enable in the Action. The
editing page for Rule Status Action Setting is shown as below:
Figure 10-65
：
Rule Status action setting page