ET-7000/PET-7000 AIO Series User Manual, version 1.0.1 beta3 Page: 152
Copyright © 2009 ICP DAS Co., Ltd. All Rights Reserved. E-mail: [email protected]
B.2. Power ON Value
If the ET-7000/PET-7000 series module is reset, the output of the module is set to the
,
35 to 00438 records the Power ON value for the 4-Channel
e careful to set the ON value to DO address 00431 to write the DO Power ON value to
onfiguration via Web page
000/PET-7000, and click the “Modbus I/O Settings”
lick the ON/OFF radio box to set the power ON/OFF value and then click the button to
predefined Power ON Value for the DO and AO channels. DO address 00435 of the
ET-7000/PET-7000 series Modbus register is the first address of the Power ON value
and the total number of channels depend on the type of module.
For example:
Addresses 004
ET-7017/PET-7017.
B
the EEPROM of the ET-7000/PET-7000 DO module after using Modbus commands (05
or 15) to change the Power ON value.
C
Browse to the homepage of the ET-7
link in the Configuration Section of the Main Menu tree.
C
enable the settings to take effect.
