Icom MR-570R страница 42 Скачать руководство пользователя

Страница: 42 / 49

MAINTENANCE

Continued, reliable operation of the radar depends on how you care for your equipment. The simple maintenance
tips that follow can help you save time and money, and avoid premature equipment failures.

• Cleaning

Wipe the surface of the scanner with a clean soft
cloth.

• DO NOT use strong solvents such as benzene or alco-

hol.

Check that there is no drift or caked salt.

• A heavy deposit of dirt or caked salt on the painted sur-

face of the upper scanner unit will cause a considerable
drop in radar performance.

Check for cracks or deterioration of the rubber
packing and replace it if necessary.

• Mounting

Check the mounting bolts of the scanner unit and
tighten if necessary.

■

Periodic maintenance

Keep the equipment as clean as possible.

• Use a soft cloth to remove dirt, dust and water.

Check all hardware for loose screws, bolts, etc.

Check cables and terminal connections.

■

Scanner unit maintenance

■

Display unit maintenance

• Cleaning
Dirt on the LCD will, in time, leave a film of contami-
nates which tend to dim the picture.

Wipe the surface of the display unit with a clean soft
cloth.

• DO NOT use strong solvents such as benzene or alco-

hol.

If the picture is still dim, clean the LCD screen.

WARNING:

BE SURE the power is OFF before

working on the radar.

WARNING:

BE SURE the power is OFF before

working on the radar.

WARNING:

BE SURE the power is OFF before

performing any maintenance.

■

Options

• OPC-1076 SYSTEM CABLE

Allows you to install the display unit and scanner up to 15 m (49

ft) apart.

• OPC-1077 SYSTEM CABLE

Allows you to install the display unit and scanner up to 20 m (65

ft) apart.

• OPC-1078 SYSTEM CABLE

Allows you to install the display unit and scanner up to 30 m (98

ft) apart.

Содержание MR-570R


















































Результаты поиска

Содержание MR-570R

Отзывы:

Похожие инструкции для MR-570R

Бренды по названию

Популярные бренды

Icom MR-570R, Руководство по эксплуатации

Результаты поиска

Содержание MR-570R

Отзывы:

Похожие инструкции для MR-570R

Бренды по названию

Популярные бренды