manualshive.com logo in svg

Icom MR-570R, Руководство по эксплуатации

Поделиться
Скачать
Icom MR-570R Скачать руководство пользователя страница 5

ii

IMPORTANT

READ ALL INSTRUCTIONS 

carefully and com-

pletely before attempting to operate the marine radar.

SAVE THIS INSTRUCTION MANUAL.

This

manual contains important safety and operating in-
structions for the MR-570R.

R

NEVER

let metal, wire or other objects touch any

internal part of the radar.

R

NEVER

place the radar within the reach of chil-

dren.

R

NEVER

expose the display unit to rain, salt water

or any other liquids.

NEVER

connect the radar to AC or more than 42 V

DC. This will damage the radar.

AVOID placing the display unit in excessively dusty en-
vironments or in direct sunlight.

AVOID placing the display unit near heating equipment
or in direct sunlight or where hot or cold air blows di-
rectly onto it.

AVOID using the scanner unit in areas where the tem-
perature is below –25˚C (–13˚F) or above +70˚C
(+158˚F). AVOID using the display unit in areas where
the temperature is below –15˚C (+5˚F) or above +55˚C
(+131˚F).

AVOID using strong solvents such as benzene or al-
cohol for cleaning the radar, as they may damage the
surfaces. 

PRECAUTIONS

FOREWORD

Thank you for purchasing ICOM’s MR-570R MARINE
RADAR. 

The radar is designed especially for fishing boats. It
has powerful transmission power, a 5.7 inch LCD dis-
play and many other advanced features. 

If you have any questions regarding the operation of
the radar, contact your nearest authorized Icom Inc.
dealer.

EXPLICIT DEFINITIONS

The following explicit definitions apply to this instruc-
tion manual. 

WORD

R

WARNING

R

CAUTION

NOTE

DEFINITION

Personal injury, fire hazard or elec-
trical shock may occur.

Equipment damage may occur.

If disregarded, inconvenience only.
personal injury, fire hazard or elec-
trical shock will not occur.

CAUTION!

SART signal may not be detected and may
not be displayed on the screen depending
on the SEA, RAIN or IR settings.

Follow the following settings to detect the
SART signal on the screen.

1. Select the screen range between 6 NM

to 12 NM.

2. Set the [GAIN]* as high as possible.
3. Set the [SEA]* to minimum.
4. Set the [RAIN]* to minimum.
5. Turn the [IR]* OFF.
6. Turn the [ES]* OFF.
*See the [ADJ] menu on p. 6.

Содержание MR-570R


















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды