5
GPS OPERATION
5-19
Transmitting NMEA data
GPS Automatic Transmission
D
Entering a GPS message
Enter a GPS message to be transmitted with the
position data.
Example:
Entering “Japan TOM”
MENU > GPS > GPS TX Mode > NMEA (DV-G)>
GPS Message
1�
Push [MENU].
2�
Select “GPS.”
3�
Select “GPS TX Mode.”
4�
Select “NMEA (DV-G)” and then
select “GPS Message.”
▼
5�
Push [QUICK].
6�
Select “Edit.”
7�
Enter a GPS message of up to 20 characters.
Selectable characters and symbols
A to Z, a to z, 0 to 9, ! " # $ % & ’ ( ) * +
, - . / : ; < = > ? @ [ \ ] ^ _ ` { | } ˜ (space)
L
See page iii on how to enter characters.
8�
After entering, push [ENT].
• Displays the entered message.
L
To exit the MENU screen, push [MENU].
NOTE:
• Use the GPS Automatic Transmission function in
only the Simplex mode.
• Using the function through a Repeater may
interfere with other communications.
MENU > GPS >
GPS Auto TX
If you set the GPS Automatic Transmission function,
GPS data is automatically transmitted according to the
set time.
L
This function is not activated if your call sign (MY)
is not entered in the transceiver.
L
If
GPS Select
is set to “OFF” or“Manual,” this
function is not activated.
[ENT]
[Down]
[Up]
(Example: Japan TOM)
