7
MEMORY OPERATION
7-4
After selecting a frequency in the VFO mode, you
can write it to a selected channel or an automatically
selected blank channel�
Memory channels 001 to 499 are blank as the default�
D
Writing to the selected channel
Example:
Writing 441�100 MHz into Memory
channel 011
1� Push [V/MHz] to enter the VFO mode�
2� Rotate [DIAL] to select 441�100 MHz�
3� Hold down [S�MW] for 1 second�
•
Enters the Select Memory Write mode�
•
The Memory channel number blinks�
4� Rotate [DIAL] to select the Memory channel “011�”
L
If you select a pre-entered channel, the previous
channel content will be overwritten�
5� Hold down [S�MW] for 1 second�
▼
•
Writes into the selected Memory channel�
•
Returns to the standby screen (VFO mode)�
TIP:
You can also save the Memory content to
another channel by selecting:
•
00A/00B ~ 24A/24B:
Saves to a Program Scan Edge
channel
•
C0, C1:
Overwrites to a Call channel
•
VFO:
Overwrites to a VFO
D
Auto increment
If you keep holding down [S� MW] after writing to
the selected Memory channel, the Memory channel
number is automatically incremented after returning to
the VFO mode� (Step 5 to the left)
▼
▼
Writing to a Memory channel
Blinks
Blinks
Briefly displayed