Icom ID-31A PLUS Скачать руководство пользователя страница 38

Страница: 38 / 227

D-STAR OPERATION

4-14

Connecting to a

reflector

What is a reflector?

A reflector is a special server connected to the Internet and running a version of the D-Plus software. If the D-Plus

software is installed on your Access repeater, it provides various functions including gateway and reflector linking

capabilities (It is known as the D-STAR reflector system). The D-STAR reflector system enables a number of

D-STAR repeaters anywhere to link to a reflector. This means that when you transmit through a D-STAR repeater

linked to a reflector, your voice can be heard on other repeaters linked to the reflector, and you can hear other

stations that are connected to the reflector.

Unlinking a reflector

Before trying to link to another reflector, BE SURE to

unlink the current connected reflector.

NOTE:

If a reflector is already connected, ask on

the air whether or not you can change reflectors

and wait for responses BE SURE to reconnect

back to the same reflector when you finish your

conversation

Push [RX→CS] to select “TO,” then push [ENT].

•

Displays the TO SELECT screen

2 Select “Reflector”

•

Displays the REFLECTOR screen

Select “Unlink Reflector.”

• Returns to the DR screen, and “Unlink Reflector” and

“U” are displayed in “TO”

4 Hold down [PTT] to

unlink the reflector.

[ENT]

[Down]

[Up]

CAN

AUS

USA

D-STAR

reflector system

Reflector

Access repeater

→

INTERNET

Содержание ID-31A PLUS




































































































































































































































Результаты поиска

Содержание ID-31A PLUS

Отзывы:

Icom ID-31A PLUS, Руководство для продвинутых пользователей, Страница: 38 / 227

Результаты поиска

Содержание ID-31A PLUS

Отзывы: