4
D-STAR OPERATION
4-9
“TO” (Destination) setting
D
Using the “Local CQ” (Local Area call)
When “Local CQ” is selected on the TO SELECT
screen, “CQCQCQ” is set in “TO”
Example:
Making a Local area call by accessing the
“Hirano”
repeater
1 Hold down [DR] for 1 second to display the DR
screen
2
Push [RX→CS] to select “TO,” then push [ENT].
3 Select “Local CQ”
•
Returns to the DR screen, and “CQCQCQ” is
displayed in “TO”
D
Using the “Gateway CQ” (Gateway call)
When “Gateway CQ” is selected on the TO SELECT
screen, you can select the repeater to make a
gateway call on the repeater list
Example:
Making a Gateway CQ call to the
“Kirkland (IA)” repeater from the “Hirano”
repeater
1 Hold down [DR] for 1 second to display the DR
screen
2
Push [RX→CS] to select “TO,” then push [ENT].
3 Select “Gateway CQ”
4 Select the repeater group where your destination
repeater is listed
5 Select the destination repeater
L
Each repeater has a correct node (A, B or C
band) that you want to transmit on See page 4-2,
“IMPORTANT” for band letter details
•
Returns to the DR screen, and “Kirkland (IA)” is
displayed in “TO”
(Example: “19: USA West”)
[ENT]
[Down]
[Up]
[ENT]
[Down]
[Up]
(Example: “Kirkland (IA)”)
TIP:
After selecting a destination repeater, you can
select another repeater preset in your repeater List
by rotating [DIAL]