4
D-STAR OPERATION
4-39
D
Skip setting for the DR scan
You can set repeaters as scan skip repeaters The
selected repeaters are skipped for faster scanning
You can set the skip setting to all repeaters in the
selected repeater group, or to individual repeaters
L
When a repeater is set as a skip repeater, its “USE
(FROM)” setting is automatically set to “NO” In that
case, the repeater cannot be selected in “FROM”
(Access repeater) on the DR screen
<Individual skip setting>
MENU > DV Memory >
Repeater List
1 Push [MENU]
2 Select “DV Memory”
3 Select “Repeater List”
4 Select a repeater group where the repeater you
set the skip setting is listed
5 Select the repeater to be skipped, then push
[QUICK]
6 Select “SKIP”
•
Displays “SKIP” by the selected repeater
L
Select “SKIP” again to cancel the skip setting
L
Select “SKIP All ON” to set the skip setting to all
repeaters in the group
Repeater list operations
TIP:
•
When you select “Repeater List” on the FROM
SELECT screen, you can set the skip setting as
described to the left
•
When “FROM” is selected on the DR screen,
push [QUICK] to set the skip setting, as shown
below
▼
L
Displays “SKIP” in the “FROM” field
(Example: 11: Japan)
<Group skip setting>
1 On the REPEATER GROUP screen, select a
repeater group, as described to the left
2 Push [QUICK], then select “SKIP All ON” to skip
the repeaters in the group during the DR scan
L
To cancel the skip settings in the group, select “SKIP
All OFF”
[ENT]
[Down]
[Up]
