manualshive.com logo in svg

Icom ID-31A PLUS, Руководство для продвинутых пользователей, Страница: 157 / 227

Поделиться
Скачать
Icom ID-31A PLUS Скачать руководство пользователя страница 157

11

MENU SCREEN

11-14

Alarm Area (RX/Memory) 

(Default: Both)

MENU > GPS > GPS Alarm> 

Alarm Area (RX/

Memory)

Select the GPS active alarm range�

When a target enters in the active alarm range, the 

GPS Alarm sounds and the GPS alarm icon blinks�

 

L

 When 

Alarm Select

 is set to “RX” or “Memory,” this 

setting is enabled�

 

•

Limited:   The transceiver sounds 3 beeps and the 

GPS Alarm icon blinks when the target 

enters the 500 meter range�

 

•

Extended:  The transceiver sounds 3 beeps and the 

GPS Alarm icon blinks when the target 

enters the 1 kilometer range�

 

•

Both: 

 The transceiver sounds a beep and the 

GPS Alarm icon blinks when the target 

enters the 1 kilometer range, and sounds 

3 beeps and the icon blinks when it enters 

the 500 meter range�  

When the target exits the 500 meter 

range, but is still in the 1 kilometer range, 

the icon continues to blink, but no beeps 

sound�

Example:

When a target station enters in the active alarm range 

(500 meter or 1 kilometer range, depending on the 

setting), the GPS Alarm sounds and the GPS Alarm 

icon blinks�

Target station

Sounds 3 beeps.

Sounds a beep.

Limited range

Approximately 500 m, 547 Y

Extended range

Approximately 1 km, 1094 Y

Your location

N

GPS Logger 

(Default: ON)

MENU > GPS > GPS Logger > 

GPS Logger

Turn the GPS Logger function ON or OFF�

This function logs the position, altitude, course, speed, 

and number of satellites being used�

 

L

BE SURE to insert a microSD card�

 

L

 When 

GPS select

 is set to “OFF” or “Manual,” this 

function does not save the log�

 

•

OFF: Turns OFF the function�  

 

•

ON:   The transceiver automatically logs GPS data� 

Once this function is turned ON, the GPS data 

will be continuously logged until the function 

is turned OFF, even if the transceiver is turned 

OFF, then ON again�

TIP: 

The log data is saved on the microSD card� 

The file name is automatically created, as shown 

below:

 

•

Log start date and time:  31st October 2017 

15:30:00

 

•

File name: 

20171031_153000�log

Record Interval 

(Default: 5sec)

MENU > GPS > GPS Logger > 

Record Interval

Set the GPS Logger function record interval to 1, 5, 

10, 30, or 60 seconds�

Record Sentence

 

 

(Default: 

✔

RMC/

✔

GGA/

✔

VTG/

✔

GSA)

MENU > GPS > GPS Logger > 

Record Sentence

Set the GPS Logger function record sentence to 

RMC, GGA, VTG, or GSA�

 

•

Displays “

✓

” when the sentence is set�

NOTE: 

Select at least one sentence, otherwise an 

error beep will sound�

<<GPS Logger Only>>

MENU > GPS > GPS Logger > 

<<GPS Logger 

Only>>

You can turn ON the GPS Logger Only mode ON�

In this mode, only the GPS Logger is functioning and 

the transceiver does not transmit or receive� (p� 5-32)

 Information

L

 

•

BE SURE to insert a microSD card�

 

•

 Set 

GPS Select 

to “Internal GPS,” or “External GPS�” 

(p� 11-9)

 

•

To cancel the mode, reboot the transceiver�

GPS items

Содержание ID-31A PLUS




































































































































































































































Отзывы:

Нет отзывов