Icom ID-31A PLUS Скачать руководство пользователя страница 71

Страница: 71 / 227

GPS OPERATION

5-4

GPS TX mode and TX format types

GPS position data has 2 TX modes, D-PRS and

NMEA. Moreover, with the D-PRS mode data, 5

position formats. Position (Mobile station/Base

station), Object, Item, and Weather, are selectable.

Example:

When the caller’s TX format is D-PRS Position (Mobile)

D-PRS

D-PRS is a function that simultaneously sends position data received from the

internal or external GPS receiver, using the slow speed data packet space, along

with voice.

Position (Mobile)

A station operating from a vehicle, or other position, away from it's normal base

position�

Position (Base)*

A station operating at home or in a building.

Object*

Transmitting Object data such as an earthquake information, satellite track

information, and so on.

An Object contains a time stamp.

Item*

Transmitting Item data such as a traffic accident, lighthouse, antenna, or DV

access point position, and so on.

An Item does not contain a time stamp.

Weather*

A station transmitting weather information received from a weather device.

NMEA

A station transmitting position data (NMEA0183) received from the internal or an

external GPS receiver.

* You can receive, but cannot transmit this format with the ID-31A PLUS or ID-31E PLUS.

• The GPS TX mode, “GPS (DV-G)” and “GPS-A (DV-A),” are now called as “NMEA (DV-G)” and “D-PRS (DV-A).”

GPS (DV-G) → NMEA (DV-G)

GPS-A (DV-A) → D-PRS (DV-A)

• For users who have one of the following models:

( ID-800H, IC-91AD/E91, IC-U82, IC-V82, IC-7100, ID-51A/E, ID-31A/E, IC-9100, IC-80AD/E80D, ID-880H/E880,

IC-92AD/E92D, IC-2820H/E2820)

When you receive a D-PRS position (Base), Object, Item, or Weather information, their data is not displayed.

• Only the ID-51A/E PLUS, ID-51A/E PLUS2, ID-31A/E PLUS, ID-5100A/E, and ID-4100A/E, can receive Power,

Height, Gain, and Directivity data.

• For users who have one of the following models:

(IC-9100, IC-80AD, IC-E80D, ID-880H, ID-E880, IC-92AD, ICE92D, IC-U82, IC-V82)

If you transmit with the Altitude setting ON, the character string is included in a comment on the products that

cannot display the altitude.

• Set the GSV sentence to OFF when sending the GPS message to conventional digital transceivers (IC-2820H,

IC-E2820, ID-800H, IC- 91AD, IC-E91, IC-V82, IC-U82, IC-2200H). The GSV sentence is incompatible with them.

They will not display GPS messages properly if sent as a GSV sentence from the ID-31A/E PLUS.

Difference between older models

(As of November 2017)

Содержание ID-31A PLUS




































































































































































































































Результаты поиска

Содержание ID-31A PLUS

Отзывы:

Похожие инструкции для ID-31A PLUS

Бренды по названию

Популярные бренды

Icom ID-31A PLUS, Руководство для продвинутых пользователей

Результаты поиска

Содержание ID-31A PLUS

Отзывы:

Похожие инструкции для ID-31A PLUS

Бренды по названию

Популярные бренды