35
■
Operating CW
q
Connect a paddle, straight key or external elec-
tronic keyer as on page 18.
w
Push and hold
F-INP ENT
BAND
for 1 sec., then push a
band key to select the desired band.
e
Push
MODE
to select CW mode.
• After CW mode is selected, push and hold
MODE
for
1 sec. to toggle between CW and CW-R modes.
r
Rotate
[DIAL]
to tune in a desired signal with the
desired tone frequency.
• The S-meter indicates received signal strength when
signal is received.
t
Rotate the
[AF]
control to set audio to a comfort-
able listening level.
y
Set CW break-in operation and the CW delay time
in the set mode. (p. 79)
q
Push and hold
M-CH/RIT
SET
for 1 sec. twice to enter
the set mode.
w
Rotate
[M-CH]
to select “
BK-IN
” to set the CW
break-in operation.
e
Rotate
[DIAL]
to select the CW break-in opera-
tion from full break-in, semi break-in or OFF.
• FL : full break-in
• SE : semi break-in
• OF : break-in OFF
r
Rotate
[M-CH]
to select “
BK-DELAY
” to select
the CW delay time when semi break-in operation
is selected in step
e
.
t
Rotate
[DIAL]
to set the desired delay time.
y
Continue to set the keyer settings in the set
mode, if necessary. (p. 80)
u
Push
M-CH/RIT
SET
to exit the set mode and return to
normal operation.
u
Keying to transmit, use the paddle, straight key or
external electronic keyer to send your CW signals.
• “
” appears.
• The Po meter indicates the transmit power strength.
i
Stop keying to return to receive.
MODE
TUNER
TS
FILTER
SPCH
V/M
A/B
SPLIT
M-CL
SCAN
SET
ATT
P.AMP
COMP
VOX
MNF
RIT
1
2
3
4
5
6
7
8
0
50
28
18
14
10
21
24
=
7
3.5
1.8
F-INP
M-CH/RIT
ENT
BAND
GENE
9
.
AGC
MW
ANF
METER
NR
NB
Band keys
[DIAL]
[AF]
“
CW” or “CW-R” appears.
Appears while transmitting.
[M-CH]
Appears when semi break-in is selected.
4
RECEIVE AND TRANSMIT
