background image

14-34

14. D-STAR OPERATION (ADVANCED)

Your Call Sign

 

D

Deleting Your Call Sign

1.  Open the YOUR CALL SIGN screen. 

 »

2

 > DV MEMORY > 

Your Call Sign

2.  Touch a call sign that you want to delete for 1 

second. 

3.  Touch “Delete.” 

 • The confirmation dialog is displayed.

4.  Touch [YES]. 

 • The selected call sign is deleted from the Your 

Call Sign list, and the returns to the YOUR 

CALL SIGN screen.

5.  To close the YOUR CALL SIGN screen, push 

 several times.

NOTE:

 The currently selected Your Call Sign on 

the DR screen cannot be edited or deleted. To 

edit or delete the Your Call Sign, select another 

Your Call Sign on the DR screen.

 

D

Rearranging the display order of 

Your Call Signs

You can move Your Call Signs to rearrange 

their display order. If the stations you often 

communicate with are moved to the top of the 

list, it is easy to find them.

Example:

 Moving “Rick” above “Eddy.”

1.  Open the YOUR CALL SIGN screen. 

 »

2

 > DV MEMORY > 

Your Call Sign

2.  Touch a call sign that you want to move for 1 

second. 

3.  Touch “Move.” 

4.  Touch the position to insert the Your Call Sign 

you want to move the call sign above. 

Blinks

 • While moving, “DESTINATION” blinks.

 • The selected call sign is inserted above the 

destination call sign.

 

L

If you touch “<<Move End>>,” the Your Call 

Sign is moved to the bottom of the group.

5.  To close the YOUR CALL SIGN screen, push 

 several times.

Содержание IC-705



























































































































































































































Отзывы: