Icom IC-705 Скачать руководство пользователя страница 132

Страница: 132 / 218

13-3

13. D-STAR OPERATION (BASIC)

Enter your call sign (MY) into the transceiver

To operate D-STAR, you must first enter your call

sign into the MY call sign memory. You can enter

up to 6 MY call signs.

NOTE:

• Your MY call sign must match the call sign

registered on a gateway repeater. (p. 13-4)

• The MY Call sign in the instructions is ONLY an

example that is used in explanations.

You MUST enter your own call sign, the one that

was assigned to you and is on your license.

Example:

Enter “JA3YUA” as your own call sign

into “1.”

1. Open the MY CALL SIGN screen.

» SET > My Station >

My Call Sign

2. Touch the number for 1 second.

3. Touch “Edit.”

4. Enter your own call sign, then touch [ENT].

5. Touch the entered call sign.

• Sets the call sign to be used as MY call sign.

6. To close the MY STATION screen, push

several times.

TIP:

You can enter a note of up to 4 characters,

such as the model of the transceiver, name,

area name, after your call sign.

Содержание IC-705



























































































































































































































Результаты поиска

Содержание IC-705

Отзывы:

Icom IC-705, Руководство для продвинутых пользователей, Страница: 132 / 218

Результаты поиска

Содержание IC-705

Отзывы: