Icom IC-705 Скачать руководство пользователя страница 127

Страница: 127 / 218

12-44

12. GPS OPERATION (ADVANCED)

GPS SET

GPS

GPS Memory

The transceiver has 300 GPS memories to save

the received position data, or often-used position

data, with an alphanumeric memory name.

The channels can be divided into the “(No

Group)” group and each Memory group (A to Z)

for easy Memory management.

The display of the GPS MEMORY screen

(No Group)

GPS Memories not assigned to any

group

A ~ Z: Group Name

GPS Memories assigned to the

selected group.

GPS Memory Groups

(A ~ Z)

GROUP NAME

GPS Memory Group name

(Up to 16 alphanumeric characters)

You can edit the GPS Memory Group name.

(p. 12-21)

GPS Memories

NAME

GPS memory name

(Up to 16 alphanumeric characters)

DATE

Saved date

TIME

Saved time

LATITUDE

Saved position (latitude)

LONGITUDE

Saved position (longitude)

ALTITUDE

Saved altitude

GROUP

The group letter and the name of

the group

When you save the received position data on the

GPS POSITION screen, the received station’s call

sign is used as the GPS Memory name.

In the QUICK MENU screen, you can edit the GPS

Memory contents, such as the GPS Memory name.

» GPS >

GPS Alarm

Alarm Select

(Default: OFF)

Selects the target positions for the GPS Alarm

function.

•OFF:

Turns OFF the function.

•RX:

The GPS Alarm sounds when a

target (the last received position)

enters your active alarm range.

•Group:

The GPS Alarm sounds when a target

(positions in the GPS Memory, or in

the selected GPS Memory Group)

enters your active alarm range.

•Memory: The GPS Alarm sounds when a

target (the entered position in the

GPS Memory) enters your active

alarm range.

Alarm Area (Group)

(Default: 0.25′)

Sets the GPS active alarm range.

When a target enters this set active alarm range,

the GPS Alarm sounds, and the GPS Alarm icon

blinks.

When “Alarm Select” is set to “Group,” this setting is

enabled.

Ranges differ, depending on the Latitude/

Longitude unit setting.

•

Latitude/Longitude = ddd°mm.mm′

Ranges: 00.08′ to 59.99′ (0.01′ steps)

•

Latitude/Longitude = ddd°mm′mm″

Ranges: 00′05″ to 59′59″ (0′01″ steps)

Example:

When a target enters the active alarm range,

the GPS Alarm sounds, and the GPS alarm icon

blinks.

Point C

Sounds 3 beeps.

Your location

Point A

Point B

0.25

′

0.25

′

0.25

′

0.25

′

Содержание IC-705



























































































































































































































Результаты поиска

Содержание IC-705

Отзывы:

Похожие инструкции для IC-705

Бренды по названию

Популярные бренды

Icom IC-705, Руководство для продвинутых пользователей

Результаты поиска

Содержание IC-705

Отзывы:

Похожие инструкции для IC-705

Бренды по названию

Популярные бренды