background image

12-35

12. GPS OPERATION (ADVANCED)

GPS SET

 » GPS > GPS TX Mode > D-PRS 

> TX Format > 

Object

Object Name

Enter an Object name of up to 9 characters.

Data Type 

(Default: Live Object)

Sets the Object’s status.

 •Live Object:  The Object is valid.

 •Killed Object: The Object is invalid.

Symbol 

(Default: Radio)

The symbol is an icon that indicates the Object’s 

means of transportation or location. The saved 

symbol is transmitted along with the position data 

while in the D-PRS mode.

 

L

See page 12-32 for details of editing a symbol. 

Comment

Enter a comment to transmit it with the D-PRS 

position data.

The number of characters you can enter differs, 

depending on the Data Extension and Altitude 

data entry.

Data Extension

Altitude

Characters 

entered 

(maximum)

OFF

43 (Default)

OFF

Entered

35

Course/Speed

36

Course/Speed

Entered

28

Power/Height/Gain/Directivity

36

Power/Height/Gain/Directivity Entered

28

The symbol “   ” displays the transmittable 

comment range. Please note that the characters 

that exceed the range will not be transmitted.

Transmittable comment range display

(Example: up to 28 characters)

Position 

(Default: LATITUDE: 0°00.00′N,

 

 

LONGITUDE: 0°00.00′W, ALTITUDE: ------ft)

Displays the position information of the Object.

Push 

 to open the QUICK MENU screen 

shown below.

TIP:

 When you select “Capture From GPS” 

or “Set From GPS Memory,” you can capture 

the position from the GPS, or set the Object’s 

position from the GPS memory.

Entering the position information manually

1.  Touch “Edit” on the QUICK MENU screen.

 • The POSITION EDIT screen is displayed.

2.  Touch “LATITUDE.”

3.  Enter a latitude.

 

L

Touch “N/S” to switch the north latitude and the 

south latitude.

4.  Touch [ENT].

5.  Touch “LONGITUDE.”

6.  Enter a longitude.

 

L

Touch “E/W” to switch the east longitude and 

the west longitude.

7.  Touch [ENT].

8.  Touch “ALTITUDE.”

9.  Enter an altitude.

 

L

After entering, touch [+/−] to switch “+” and “−.”

10. Touch [ENT].

11. Touch “<<Write>>.”

12. Touch [YES].

 • The position information is entered.

Содержание IC-705



























































































































































































































Отзывы: