Icom IC-705 Скачать руководство пользователя страница 144

Страница: 144 / 218

13-15

13. D-STAR OPERATION (BASIC)

Updating the repeater list

For easy operation, a repeater list is preloaded

into your transceiver.

This section describes how to update the

repeater list using a microSD card.

You can download the repeater list from the Icom

website.

NOTE:

Before using a microSD card, see Section

6 of the Basic Manual for card details.

TIP:

The file name “705_USA_yymmdd” is used

as an example in the following instructions.

File Name: 705_USA_yymmdd.zip

Step 1: Downloading the repeater list

1. Access the following URL to download the

data files.

https://www.icomjapan.com/support/

• The repeater list and GPS data (CSV: Comma

Separated Values file), and settings file (ICF file)

are contained in the downloaded ZIP file.

TIP:

IC-705’s repeater list is uploaded to

“Firmware/Software” in the Icom website.

The displayed contents may differ.

Repeater List,

GPS Data

IC-705

Version *

20yy/mm/dd

2. Decompress the file that is downloaded from

the Icom website.

• “705_USA_yymmdd” folder is created on the

same place where the downloaded file is saved.

Step 2: Inserting the microSD card into a PC

Turn OFF the transceiver, then remove the

microSD card from the transceiver. Insert the

card into the memory card slot or memory card

reader (user supplied) on your PC.

To use the microSD card with the transceiver,

format the card using the transceiver, even ones

that are preformatted for PCs or other uses.

See Section 6 of the Basic Manual for details.

To the

Card reader

Transceiver

microSD

card

Step 3: Copying the CSV file to the microSD card

1. Double-click the “705_USA_yymmdd”

folder created in the same place where the

downloaded file is saved.

2. Copy the CSV file (Example: 705_USA_Rpt_

yymmdd.csv) in the folder and paste it in the

“RptList” folder (“IC-705” > “Csv” > “RptList”)

of the microSD card.

Depending on the

transceiver version.

Depending on the updated

file date.

Paste the copied

CSV file in this folder.

Содержание IC-705



























































































































































































































Результаты поиска

Содержание IC-705

Отзывы:

Похожие инструкции для IC-705

Бренды по названию

Популярные бренды

Icom IC-705, Руководство для продвинутых пользователей

Результаты поиска

Содержание IC-705

Отзывы:

Похожие инструкции для IC-705

Бренды по названию

Популярные бренды