Icom IC-705 Скачать руководство пользователя страница 176

Страница: 176 / 218

14-30

14. D-STAR OPERATION (ADVANCED)

Entering new information into the repeater list

Rearranging the display order of the

repeaters

You can move the entered repeaters to rearrange

their display order in the selected repeater group.

Example:

Moving “Hirano/Icom” above “Nakano.”

1. Open the REPEATER GROUP screen.

> DV MEMORY >

Repeater List

2. Touch a repeater group where the repeater you

want to move is listed. (Example: 12: Japan)

3. Touch a repeater that you want to move for 1

second. (Example: Hirano)

4. Touch “Move.”

5. Touch a repeater to insert the repeater you

want to move above it.

Blinks

• The selected repeater is inserted above the

destination repeater name.

If you touch “<<Move End>>,” the repeater is

moved to the bottom of the group.

6. To close the Repeater List screen, push

several times.

Adding new repeater information

from RX History

1. Open the RX HISTORY screen.

2. Rotate

to display the repeater you

want to add to the repeater list.

3. Touch [DETAIL].

4. Rotate

to display “RXRPT1” and

“RXRPT2.”

5. Push

6. Touch “Add To Repeater List.”

7. Touch the repeater call sign that you want to

add to the repeater list.

• Displays the REPEATER LIST EDIT screen.

The selected repeater call sign is automatically

entered.

See pages 14-25 ~ 14-27 to edit the contents.

8. Touch “<<Add Write>>.”

• The confirmation dialog is displayed.

9. Touch [YES].

• The repeater contents are added to the repeater

list, and the display returns to the RX HISTORY

screen.

Содержание IC-705



























































































































































































































Результаты поиска

Содержание IC-705

Отзывы:

Похожие инструкции для IC-705

Бренды по названию

Популярные бренды

Icom IC-705, Руководство для продвинутых пользователей

Результаты поиска

Содержание IC-705

Отзывы:

Похожие инструкции для IC-705

Бренды по названию

Популярные бренды