Ice SCRUB 35C, Руководство по эксплуатации и обслуживанию

Страница: 11 / 28

11 11
MACHINE PREPARATION
1. Open the two rear hinges that close the battery compartment
2. Rotate the handlebars by raising the handlebar movement lever (see “FIXING THE
HANDLEBARS”)
3. Position the battery in the compartment by using the relative handle
4. Connect the clamps of the cable supplied as follows:
 red clamp on the positive pole (+) of the battery
black clamp on the negative pole (-) of the battery
WARNING: you are advised to only use airtight batteries in order to avoid the
leakage of acids!
WARNING: you are advised to have the electric connections made by a
qualified, ICE-trained technician
WARNING: you are advised to always wear protective gloves in order to avoid
the risk of serious injury to your hands
WARNING: You are advised to only lift and move the batteries with lifting and
transportation means suitable for the specific weight and size
7. CONNECTING THE CONNECTOR
5. Connect the battery connector to the machine connector.
6. reassemble all the elements
WARNING : this process must be carried out by qualified personnel. The
incorrect or imperfect connection of the cables to the connector can seriously
harm people and damage objects.
8. RECHARGING THE BATTERIES
Perform a battery charging cycle before using the machine.
When replacing the battery, be sure to use batteries that are suitable for the battery charger installed
(use only 12V AGM or Gel batteries).
In order to recharge the battery:
1. Make sure the recovery tank and the solution tank are empty
Move the machine near to the battery charger